Carbon Conductive Paste for Printing Screen

Our conductive carbon pastes are single part screen printable thermoset pastes.
They offer exceptional levels of hardness(5H) and electrical conductivity.
Typical applications include; EMI/RFI shielding of flexible substrates, potentiometers and printed resistors for cameras/motors.

Product Benefits

  • Excellent hardness (5H)
  • Excellent variety of resistance (40Ω to 2MΩ)
  • Single part system with excellent printability

Paste Preparation

The paste is a single part system. Gently stir before use. Avoid rapid stirring to prevent air entrapment during the stirring process. Once the paste has been removed from the container for printing, this may introduce contamination. Please do not put used paste back into the original container.


Equipment can be cleaned using alcohols such as IPA or acetone.

Storage and shelf-life

Please keep the container tightly closed and store in a cool place in a refrigerator or freezer at 10℃ or below. The shelf life of unopened containers at room temperature (25℃ or below) is 6 months from the date of shipment. Nagano Tectron cannot assume responsibility for a paste that has not been stored in appropriate conditions or where the pastes have been contaminated following use.


Product Number MOQ Resistancce Hardness Viscosity after mixing
Temperation to be used Time to be cured
GM-041 10kg 40Ω/sq 5H 200 ~ 500 dPa・s 200℃ 30 minutes
GM-201 10kg 200Ω/sq 5H 200 ~ 500 dPa・s 200℃ 30 minutes
GM-202 10kg 2KΩ/sq 5H 200 ~ 500 dPa・s 200℃ 30 minutes
GM-203 10kg 20KΩ/sq 5H 200 ~ 500 dPa・s 200℃ 30 minutes
GM-204 10kg 200KΩ/sq 5H 200 ~ 500 dPa・s 200℃ 30 minutes
GM-205 10kg 2MΩ/sq 5H 200 ~ 500 dPa・s 200℃ 30 minutes